Product Line Increases To Meet Demand For Heatstar™ By Enerco

Cleveland, OH -- Responding to the changing needs and expectations of customers, Heatstar by Enerco has added six new heaters to its already extensive product line-up of gas-fired portable and mounted garage/workshop and outdoor construction heaters. The Heatstar line features high and low intensity infrared, forced air, radiant, convection and indirect fired heaters for a wide range of commercial, industrial and residential uses. This deep product line provides heating solutions of all sizes, from small, temporary needs to permanent commercial installations. As always, Enerco backs its products with factory-direct support service, a comprehensive line of accessories, and pricing opportunities for dealers and distributors.

New product additions in 2005 for the Heatstar line include:

New Heatstar 400,000 and 600,000 BTU/HR Forced Air High Pressure Direct Fired Heaters

These two new high powered direct fired heaters from Enerco are the only direct fired heaters designed for diesel fuel as well as kerosene and fuel oil.

The HS400KT offers a rated heat output of 400,000 BTU/HR with a heating capacity of up to 75,000 square feet. The larger HS600KT generates 600,000 BTU/HR with a heating space capability up to 114,000 square feet. Large capacity 26.5 gallon and 36 gallon fuel tanks provide a full work day of running time.

Both heaters features a powerful fan with high CFM output, a water resistant control panel and top mounted access door for easy maintenance. The center mount wheels and rear handle have been designed and placed to make these heaters surprisingly balanced and mobile for their size. An optional remoter thermostat with 30 ft. cord is also available for zoned temperature control.

Heatstar's direct fired heaters can be used for a variety of applications including large construction sites, concrete freeze protection, crop drying, temporary emergency heating needs and outdoor job sites.

New Heatstar 210,000 BTU/HR Forced Air Kerosene Heater

With an output of 210,000 BTU/HR, the HS210KT heats approximately 6,000 square feet and will run up to eight hours on a full tank. It features new built-in thermostat, trouble-shooting diagnostics with an LED indicator, overheat safety shutoff, thermostat, lighted on-off switch, fuel gauge, electric cord wrap, transport handles and oversized pneumatic tires. Typical uses include construction sites, emergency heat, factories, events, and farm buildings.

New Heatstar 85,000 BTU/HR Forced Air Propane Heater

With and output of 85,000 BTU/HR, the HS85FAV heats up to 2,000 square feet for up to eight hours on a 20-lb. tank. Features include adjustable height control, high temperature limit switch and continuous ignition. Lightweight and portable, the HS85FAV is a perfect fit for loading docks, agricultural buildings, workshops and small to medium sized construction sites. Ten-foot hose and regulator are included.

New Heatstar 400,000 BTU/HR Forced Air Propane Heater

The HS400FAVT propane heater, with its high output of 250,000 - 400,000 BTU/HR, is ideal for medium sized to large construction sites, events, barns and warehouses. Running up to 8.5 hours on a 100-lb. tank., the HS400FAVT heats approximately 9,000 square feet. This new heater features a thermostat, high termperature limit switch, and automatic solid-state ignition. Ten-foot hose and regulator are included.

New Heatstar 75,000 BTU/HR Unit Heater

With a choice of either propane or natural gas, the HSU75 with 75,000 BTU/HR has been introduced to fill the market demand for a higher output unit heater for 3 to 5 car residential garages, warehouses and storage buildings. The Heatstar unit heater can be installed in low-profile buildings; needing only a one inch clearance from the ceiling. An optional vent kit and thermostat kit are also available for either vertical or horizontal installation. The HSU75 is backed by a 3-Year warranty on parts and burner and a 10-year warranty on the heat exchanger.

All Heatstar propane and natural gas heaters are CSA Certified. For more information and photos on Heatstars full line of heating products, visit www.enerco.com or contact Tim Jedrzejek at Enerco: 216-916-3000; 800-251-0001 or tim.jedrzejek@enerco.com

Headquartered in Cleveland, Ohio, Enerco/Mr. Heater Inc. is a leading manufacturer of gas-fired portable heating products for consumer, commercial and industrial applications.

##